An above ground pool pump is one of the most vital parts of any pool’s water circulation system. That’s why choosing the best above ground pool pump is important. There are various types and models from different manufacturers.
Buying the best pool sump pump will ensure that you experience little or no stress at all to keep your pool in perfect condition. In our quest to help you maintain your pool in terms of water circulation, removal, or refilling, our team of expert reviewers went into the market in search of what we called the best ground pump for pools. This step was taken to help you overcome the bottleneck being a face in the tons of the products available online. We also looked at other areas such as how to pick the best pool pump for above ground pool, how to set up your pool pump, without hiring an expert and other frequently asked questions answered as well. Meanwhile, below is a comparison table for quick side by side comparison and this is followed by the review of the best options you can consider and the rest of what makes a good pump for your pool.
Best 8 Above Ground Pool Pump Comparison Table
8 Best Above Ground Pool Pump Reviews Consumer Reports
1. Hayward SP1580X15 Flo LX: Best Above Ground Pools 2018
The Hayward SP1580X15 PowerFlo LX pump is designed for both above-ground and in-ground pools. This pool pump is built for durable and long-lasting performance. It has a heavy-duty corrosion-proof housing designed to be weather resistant. This high-performance pump also features a double-sized heat resistant seal which ensures the durability of the pump motor. This LX Series pump features an automatic thermal overload switch which turns off the motor when it overheats to avoid damage. It is also 100% drip-proof. The Hayward SP1580X15 is easy to maintain thanks to a drain plug and a clear cover that makes it easy to see when the basket needs to be cleaned.
2. Harris H1572730: Best Above Ground Pool Pump
The Harris H1572730 ProForce may not be a big name brand, but it delivers just as excellently at a fraction of the cost. This unit is an advanced piece of engineering designed to deliver outstanding performance at very minimal noise levels. The ground pump features a heavy-duty construction that is resistant to corrosion. Its motor shaft is made with stainless steel which is further reinforced with thermoplastic to ensure durability. It features a drain plug for convenient cleaning as well as a large filter basket that is also quite easy to clean.
3. Hayward CC15093S: Best Pool Pump System with Filter
Hayward CC15093S features a glass-reinforced filter thanks that are designed to be resistant to corrosion. This feature ensures the durability of your filter pump unit. The 1.5HP pump features a quick release air valve and a pressure gauge. This unit is a single speed pump ideal for pools with as much as 57,000 gallons of water capacity. The pump’s filtration system is large and long, which ensures equal distribution of dirt and debris over the filter surface. The Hayward CC15093S pump features a special an Easy-Lok ring design this makes it quite easy to access the internal components of the pump in one easy turn. The unit is designed for seamless operation and is quite easy to install as well.
4. Pentair 340043: Best Quality-High-Performance Pump
The Pentair 340043 is a heavy-duty pump and is one of the most energy-efficient above ground pools you will find around. This 1.5HP high-performance unit is built for heavy-duty use thanks to a thick wall and highly durable parts. Another major highlight of this unit is its noise reduction capabilities. The pump is compact and it uses a high service 56 square flange motor, which helps to limit the hydraulic noise as the unit operates.
5. Intex Krystal: Best Intex Pool Reviews
The Krystal Clear Sand Filter Pump by Intex is not only powerful, but it has excellent water filtration capabilities as well. The unit uses all-natural sand to filter, backwash, and rinse water before recirculating the system. The above ground pool pump is a hassle-free unit that requires virtually no maintenance at all. You only have to replace the sand every 5-years and you are good to go. The pump has a 6-way control valve and can handle pools with as much as 19,600 gal water capacity. This makes it suitable for most above ground pools.
6. Intex 28633EG Krystal: Best Cartridge Filter Pump
This easy to use unit is designed specifically for above ground pools. This unit is designed for easy installation and seamless use. It is double insulated and features an air-release valve for getting rid of air that may be trapped in the filter chamber as well as a valve for flushing sediments from the bottom of the filter chamber. To maintain the Intex 28633EG is a complete breeze. You only have to replace or rinse the cartridge to keep the unit running effectively. For extra convenience, this pump comes with an auto-timer, which makes it possible to set the operation times for the pump.
7. Blue Wave NE6171B: Best Replacement Pump for Above Ground Pools
The 1.5Hp Blue Wave NE6171B is a high-performance pool pump built for above ground pools. This unit’s dual-port design makes it compatible with almost every type of filter system thanks to a vertical and horizontal discharge system. This Blue NE6171B pump is a self-priming unit and it operates quietly and efficiently at all times. But what sets this unit apart is its durable polymer construction. This ensures that the filter continues to deliver excellently for many years to come.
8. Blue Wave NE6151B Pool Water Pumping System
The 1HP Blue Wave NE6151B is a top-quality durable construction unit designed to fit into any filter system quite conveniently. This unit has a dual-port design suitable for both horizontal and vertical discharge. The Blue Wave NE6151B is built to resist corrosion thanks to its polymer construction. The pump is quite efficient but operates at a very low noise level. If you’re looking for small above ground pools for small yards, this is also a good choice.
How To Pick The Best Above Ground Pool Pump
Whether you are shopping for a replacement pump or you are purchasing a pump for your above ground pool for the first time, you must know the important features to look out for. Buying a good quality unit will ensure that you get your money’s worth and the best results from your pump. Here are some of the important factors to consider to pick the best above ground pump.
Consider the size
Sizing a pool pump correctly is arguably the most important step for choosing the right pump for you. Fortunately, above-ground pool pumps are a lot easier to size compared to pumps for in-ground pools. This is mainly because they are typically installed below the waterline. You also don’t need to factor in the plumbing into your sizing calculation.
For round pools measuring 8 to 15 ft, a 1/3HP pump will be just sufficient. For larger round pools measuring as much as 24 ft, you need a 1HP pump. Pools larger than 24 ft require pumps that are at least 1.5HP for optimum performance. The sizing consideration for oval pools is slightly different:
However, bear in mind that some other factors may require you to increase the horsepower of your pool pump. For instance, you should consider the pool traffic. Pumps with lower hp will still perform well on pools with light pool traffic but you may need a pump with higher HP for pools with higher traffic. You should also consider a pump with higher HP if you have another pool fixture that you want to pump water through such as a filter.
- Energy Consumption
Power usage is another important consideration when shopping for above ground pools. Be sure to confirm the energy efficiency of the pool you intend to purchase to keep power usage to the barest minimum. This will save you cost in the long run.
- Construction Materials
The construction or build of your pump will determine its durability. Hence, it is best to choose pumps that are built with high-quality materials to avoid changing pool pumps every year. It is best to go for pumps made with plastics that are weather resistant and can also resist chemicals, heat and impact damage. Such pumps may cost more, but a cheap unit will end up costing more in the long run in terms of repairs.
- Safety features
Pumps with features that keep them safe in cases of overload or power surges are important. Look out for pool pumps with overload breakers, overheating protection and surge protectors. They not only protect the unit from damage, but they also keep your home safe.
- Ease of installation and use
Generally, you don’t need a professional to install an above ground pool pump. However, the ease of installation varies from unit to unit as well. Be sure to check the intake and drain ports of the pump and see that it matches your pool. Otherwise, you will have to purchase additional adapters to install the unit.
- Filtration type
- Generally, you get two types of filtration options in Above ground pool pumps. If you are looking for a more cost-effective option, then pumps with sand filters are better since they require replacement only once in a year or even less often (as much as once in 5 years). Cartridge filters, on the other hand, need more frequent replacement and cleaning.
How To Set Up Above Ground Pool Pump
Setting up an above ground pool pump is quite simple and straightforward. Usually, you should be able to complete the entire set up on your own without professional help although you may need some help with the electrical connections in some cases. Here is a simple step-by-step guide to follow:
Step1 – Choosing a location: the first step to installing a pool pump is to choose a suitable location. Typically, you want to locate the pump and the filter unit close to each other and as close to the pool skimmer outlet as possible. The pump should be placed level on the ground and below the water level of the pool.
Step2– Attach the hoses to their corresponding parts of your pool: First, you should attach one pump hose to the skimmer pipe. This located below the skimmer basket. The hose should be placed over the pipe first then sealed tightly with a clamp. The other end of the hose can then be attached to the pump and tightened.
After doing this, couple the return hose. This hose should first be attached to the pool’s return pipe and secured firmly with a clamp. The other end should then be connected to the return valve of the pool’ filter. Be sure to seal the hose with a clamp.
Step3 – Connect the pump to the filter then prime and activate the pump: once set up, prepare the pool pump for operation by priming it. The pump will be filled with water to a designated level. Set up the pool filter as well by filling with the filtration medium or installing the cartridge. When all is set, plug the pump into the electrical connection. It should begin to circulate water immediately. Finally, check all the hoses for leaks and tighten clamp screws further if required.
Wrapping It Up
A pool pump is the heart of the filtration system of any pool. Hence, choosing a good quality unit will ensure long term durability and convenience for you. You can choose from any of the top quality pool pumps reviewed in this article. However, our top pick is the Intex Krystal Clear Sand Filter Pump because it is cheap, efficient and quite easy to maintain. Before you leave, see the product comparison table again.